Jiashan PVB Sliding Bearing Co.,Ltd
Move Forward Today Tomorrow
Add to Cart
PVB014 Steel Back PTFE Metal Polymer Composite Self Lubricating Plain Bushing for Shock Absorber
PVB014 Self lubricating bearing is made of steel back as base material, sintered bronze powder as middle layer and PTFE mixture as sliding layer. This type of sliding bearing is special designed for reciprocating motion conditions. It's also called DP4 DU bushing, sliding bushing,oil free bushes,SF-1 oilless bearing,PTFE coated self-lubricating bearing,pilot DU bearing,damper bushing bearing and metal polymer composite DU bearing.
Material Structure
1.PTFE with cooper 0.01~0.03mm
2.Porous bronze 0.2~0.3mm
3.Steel backing 0.7~2.3mm
4.Tin-plating 0.005mm or copper plating 0.008mm
Characteristics
PVB014 bushing is efficient even under sudden break off the oil lubricating, wear resistant, which can keep the lubricating oil clear after long period of working.
This bushing can protect the mating surface from wearing.
Particularly suitable for reciprocating movement.
Availability
Application
PVB014 self lubricating bushing is particularly apply for reciprocating movement products, such as shock absorber of automobiles & motorcycles, pneumatic cylinder and so on
Technical Data
| Specific load capacity (static) | ≤ 250 [ N/mm ] | |
| Specific load capacity (dynamic) | ≤ 140 N/mm at low speeds | |
| Friction value | 0.04 to 0.2 | |
| Temperature | -195 to +280 [ °C ] | |
| Max. sliding speed | 12.5m/s | |
| Max. Pv (dry) | 3.6N/mm2.m/s | |
| Max. Pv (lubrication) | 50N/mm2.m/s | |
Tolerance Details
Housing Ø: H7
Bushing inner-Ø after mounting: H9
Shaft tolerance: f7 to h8
Mouting Suggestion
Housing: Mounting bevel min. 1.5 mm x 15-45°
Shaft Material:Steel, hardened or untempered, surface roughness ≤ Rz 2-3
Shaft: Mounting bevel 5 mm x 15°, edges rounded
The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may be necessary when mounting.