Jiashan PVB Sliding Bearing Co.,Ltd
Move Forward Today Tomorrow
Add to Cart
JDB-50 CuSn12 Tin Bronze Alloy Oiles Self-lubricating Bearing
JDB-50 graphite plugged tin bronze oiles bearing is based on tin bronze material. This type of self-lubricating bearing is also called #500 oilless bearing,brass bearing,cooper bushing,solid sliding bearing,guide bushing and graphite filled bearing.
Material
CuSn12+Graphite
Base Material Details
| CuSn12 Material Chemical Composition | ||||||||
| % | Cu% | Sn% | Ni% | Pb | Zn% | Fe% | Mn% | P% |
| Min. | 85.00 | 10.50 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
| Max. | 89.00 | 13.00 | 2.00 | 0.70 | 0.50 | 0.20 | 0.20 | 0.60 |
Characteristics
● Have Incomparable performance under a high load, low speed operation. Also perform well without lubrication;
● Excellent wear resistance in such places where an oil film is difficult to be formed due to reciprocating, oscillating motions and frequently intermittent operations;
● Remarkable resistance to corrosion and resistance to chemical attack;
● Maintenance free and save operating cost
Availability
● Cylindrical oiles bushing, flanged oilless bush, thrust washer and slide plate are standard fabrication.
● Special designed solid metal bearing and material can be made according to your design.
● Other material can be made based on your requirement.
Application
JDB-50 Graphite plugged tin bronze oiles bearing is widely used in successive casting machine, mineral mountain machinery, shipping, steam turbine etc.
Technical Data
| Material | CuSn12 |
| Density | 8.9 |
| HB Hardness | ≥75 |
| Tensile Strength MPa | ≥270 |
| Yield Strength MPa | ≥150 |
| Elongation % | ≥5 |
| Thermal Expansion Coefficient | 1.8x10*%/°C |
| Max. Operation Temp. | -40~+400°C |
| Max. load MPa | 50 |
| Max Speed(dry) | 0.5 |
| Max Speed(lubricated) | 2.5 |
| Max.PV N/mm² *m/s(Dry) | 1 |
| Max.PV N/mm² *m/s(Lurbicated) | 1.65 |
Bronze Base Material International Code
| Common name | International Code | ||||||
| Standard | China | Germany | Japan | European | British | Italy | American |
| GB1176-87 | DIN | JIS | (EN 1982) | BS 1400 | JM | ASTM(UNS) | |
| Manganese bronze | ZCuZn25Al5Mn4Fe3 | CuZn25Al5 | CAC304/HBsC4 | HTB2 | JM-18 | C86300(SAE430B) | |
| Nickel-Aluminum Bronze | CuAl10Ni5Fe5 | G-CuAl10Ni | AlBC3 | CB333G | AB2 | JM7-15 | C95500 |
| Leaded bronze / Gun Metal | ZCuSn5Pb5Zn5 | CuSn5ZnPb | BC6 /BC6C | CC491K / CB491K | LG2 | JM1-15 | C83600(ASTM B 505) |
| Leaded bronze / Gun Metal | ZCuSn7Zn4Pb7 | G-CuSn7ZnPb,RG-7 | CC493K | LG2 | JM-1 | C93200(SAE660) | |
| Tin Bronze | ZCuSn12 | G-CuSn12 | CAC503B | CC483K /CB483K | PB2 | JM3-15 | C90800(ASTM B 427) |
| High leaded tin bronze | ZCuSn10Pb10 | CuSn10Pb10-C | CC495K / CB495K | LB2 | JM-15 | C93700 / SAE64 | |
| High leaded tin bronze | CuSn7Pb15 | CuSn7Pb15-C | CC496K | AB2 | JM-4 | C93800 | |
Mouting Suggestion
Housing – Ø: Mounting bevel, min. 1,5 mm x 15-45°
Shaft Material:Hardened steel, surface roughness < Rz 6,3
Shaft: Mounting bevel, 5 mm x 15°, edges rounded
Force fitting mandrel: The application of an adequate force fitting mandrel is advisable. Grease lubrication of the outer surface may be necessary when mounting.
Why Choose US
More than 15 years experience Advanced QC checking equipments
Professional manufacturer and exporter Professional QC checking team
Professional production team, high quality Customer focus sales team
Automated mass production, high efficiency Perfect customer service